MIKE96
Well-known member
My Zookeeper was working fine for a while. I had replaced all the 4116 chips and it ran like a champ. Today I turned it on and the marquee & coin door lamps work but on the screen the monitor doesn't come up and it has a popping sound also the board led's R37 blinks while the popping noise is not going on and when the popping noise is going on the rest of the led's on the board are lighting up only when the noise occurs.It still has the original power supply in the cabinet.I tried to coin it up and it does nothing and tried the service switches as well and nothing happened.
What could be the issue? Thanks for any help!
What could be the issue? Thanks for any help!