pinnut Active member Joined Aug 3, 2010 Messages 1,084 Reaction score 20 Location New York Oct 5, 2017 #1 ive got a zenith chassis, see pic. it has a couple of open connectors on the board, i cant find any info on hooking up rgb ground and sync. anybody know which connector to use, what the sync is, and the pin outs? thanks Attachments 20171005_184422.jpg 649.3 KB · Views: 25
ive got a zenith chassis, see pic. it has a couple of open connectors on the board, i cant find any info on hooking up rgb ground and sync. anybody know which connector to use, what the sync is, and the pin outs? thanks
security0001 Well-known member Donor 6 years: 2020-2025 Joined Jan 10, 2011 Messages 9,349 Reaction score 2,812 Location Montana Oct 5, 2017 #2 they look like .156 headers. https://www.arcadepartsandrepair.com/product-category/connectors-sockets-pins/156-kk-molex/
they look like .156 headers. https://www.arcadepartsandrepair.com/product-category/connectors-sockets-pins/156-kk-molex/
gamefixer Well-known member Joined Feb 27, 2005 Messages 9,082 Reaction score 551 Location Colorado Oct 5, 2017 #3 schematics and wiring diagram can be found here. http://pdf.textfiles.com/manuals/AR...ral Info. & Trouble Shooting Monitors Part 1 [English].pdf Not sure where the RGB/SYNC input is though.
schematics and wiring diagram can be found here. http://pdf.textfiles.com/manuals/AR...ral Info. & Trouble Shooting Monitors Part 1 [English].pdf Not sure where the RGB/SYNC input is though.
gamefixer Well-known member Joined Feb 27, 2005 Messages 9,082 Reaction score 551 Location Colorado Oct 5, 2017 #4 My guess would be the connector just above the pots is the input.
gamefixer Well-known member Joined Feb 27, 2005 Messages 9,082 Reaction score 551 Location Colorado Oct 5, 2017 #5 connector labeled "E." 1 and 2 are SYNC, 3 is GND, 4 is Blue, 5 is Green and 6 is Red.