Zenith A63ADG25X 27" See Photo

arcadehero1980

New member
Joined
May 20, 2011
Messages
59
Reaction score
0
Location
Trussville, Alabama
I moved my machine 2 feet and turned it back on and this is what I have.(see photo). Any suggestions on what might fix it?
 

Attachments

  • 2011-06-10 16.59.02.jpg
    2011-06-10 16.59.02.jpg
    105.7 KB · Views: 43
Zenith A63ADG25X is not the monitor make\model.
An A63 is a 25", not 27".

But anywho....
I'd check that the video input cable didn't come loose. (red, green, blue, sync, etc)

Does the game play "blind" ? (can hear it running, coin it up and all that)
 
Thanks for the info. All cables appear to be tight and where they are suppose to be. I did notice that the power supply was moving around so I made sure all the mounting screws were tight. I think it may be a grounding issue if that makes sense? When the braided ribbon grounds are moved the screen moves. I hope this helps with the diagnosis. I am going to try a different power supply and see if that helps.

Zenith A63ADG25X is not the monitor make\model.
An A63 is a 25", not 27".

But anywho....
I'd check that the video input cable didn't come loose. (red, green, blue, sync, etc)

Does the game play "blind" ? (can hear it running, coin it up and all that)
 
That's why I would want to know if the game is playing at all.

Unplug and re-plug in any connectors going to the game board itself.
 
Last edited:
I think you guys are right. I went from pic 1 to pic 2 in a matter of 5 feet. Game board dead.
 

Attachments

  • 2011-06-04 10.10.37.jpg
    2011-06-04 10.10.37.jpg
    91.3 KB · Views: 20
  • 2011-06-10 16.59.02.jpg
    2011-06-10 16.59.02.jpg
    105.7 KB · Views: 13
Back
Top Bottom