Okay... been really going through my ZPs to get them all up and running.
One is giving me a "TILT" error once it starts and finds the ball.
Even if I unplug the tilt device from the harness, it still states "TILT".
I will swap the board out to see if that stops it to rule out a couple of things... but if anyone has come across this, advice would be appreciated!
One is giving me a "TILT" error once it starts and finds the ball.
Even if I unplug the tilt device from the harness, it still states "TILT".
I will swap the board out to see if that stops it to rule out a couple of things... but if anyone has come across this, advice would be appreciated!
