z-cab 3-koam for sale norcal no pcb

cbass

New member
Joined
Jan 3, 2010
Messages
226
Reaction score
1
Location
Stockton, California
Rating - 87.5%
7   1   0
selling a z-cab by 3-koam, its pretty old (92) but still pretty good, no water damage, some tears on the right side and dirty marks, 4inch ding on the left side where the tmolding is at, control panel has some extra holes drilled but it fan easily be converted back to the 6 buttons layout for fighting games like street fighter, looking under the control panel looks like this was a champion edition cab, monitor works however it looks like the red is high and there are red lines going across the screen, (will upload more pictures in a couple of hours) i just bought this cab for the pcb so it wont be included, marquee not included but red bezel i can throw in...both speakers work but the top light bulb is out. jamma harness is present with no midifications done to it so its the easy disconnect cables, can pull out drawer to install pcb...bigger coin door lock was installed.

looking to get $60 for it since these are nice cabs and do not look ugly or have a weird setup....questions? please ask

DSCN2601.jpg

DSCN2600.jpg

DSCN2598.jpg
 
PM sentttttt

selling a z-cab by 3-koam, its pretty old (92) but still pretty good, no water damage, some tears on the right side and dirty marks, 4inch ding on the left side where the tmolding is at, control panel has some extra holes drilled but it fan easily be converted back to the 6 buttons layout for fighting games like street fighter, looking under the control panel looks like this was a champion edition cab, monitor works however it looks like the red is high and there are red lines going across the screen, (will upload more pictures in a couple of hours) i just bought this cab for the pcb so it wont be included, marquee not included but red bezel i can throw in...both speakers work but the top light bulb is out. jamma harness is present with no midifications done to it so its the easy disconnect cables, can pull out drawer to install pcb...bigger coin door lock was installed.

looking to get $60 for it since these are nice cabs and do not look ugly or have a weird setup....questions? please ask

DSCN2601.jpg

DSCN2600.jpg

DSCN2598.jpg
 
wow i did not know i was going to get a lot of ppl interested, but anyways you guys have been asking for more pictures so i will be uploading them here...

DSCN2625.jpg

control panel, 6 button setup can be done again, this was...SFIICE, time killers, NEOGEO

DSCN2631.jpg

DSCN2632.jpg

DSCN2633.jpg

DSCN2635.jpg

looks like a hantrex monitor? but works
 
Back
Top Bottom