Yoke repair kits - did you buy one?

Daviea

Permanently Banned - See: Ram Controls Forum Secti
Joined
Jul 18, 2006
Messages
958
Reaction score
8
Location
Huntington Beach, California
Rating - 85.4%
82   14   0
NOTICE!! Anyone who has purchased a yoke repair kit from me from JAN 2009 through MAY 2010, please contact me.

All kits have been updated to include a few parts and I want to make sure none of you missed the boat - I'm sending FREE parts to compliment those repair kits!!

Also, if you ended up with 60T gears that you didn't use, I have a favor to ask - take a photo of every 60T gear (not in use) you have (both sides) and send me the photos. I'm trying to hunt down some prototypes 60T gears (about 12 of them) which apparently slipped into the stream - they're perfectly fine, but I want to swap them out for full production gears which are even better!! :)

Dave
 
Ummm...do we have to have proof we bought one? And question number two is - do you pretty much remember if we did or didn't buy one?






:D
...
 
I have the database, so I can go back and do it that way. I'd rather people who feel that they want the parts come forward (and show me pics of the 60T gears while they're at it).

I'm happy to trust that you guys won't try to pull one over on me. :)

Dave
 
Dave
I bought one sometime last summer/fall. I dont know of any parts I could need it works perfect. For the haters out there my parts were at my door in less than two days just my 2 cents. If you need a picture of the gear give me a couple days, send me your email and I will forward it to you. Thanks for the great stuff.
 
Shoot. I have a Yoke Rebuild kit, but I do not recall when I got it. I'll have to do some digging.................... Have it in the queue for my restore, but haven't gotten there yet.


ArcadeMaze!
 
Hi Dave,

Would you mind expanding a little on what the changes are? I have a premium rebuild kit which I'm in the process of installing so I don't want to delay unnecessarily (I'm in the UK), but nor do I want to fit a part which is going to fail.

Nice kits btw :)

tim
 
Added parts: triggers, spacer bearings, nyogel 779zc

The prototype 60T gears are fine, just not full production models. I wanted to reign them in and replace them with the production models. I won't know if you have the prototype, I won't know for sure unless you show me pictures of BOTH sides of the gears.

Dave


Hi Dave,

Would you mind expanding a little on what the changes are? I have a premium rebuild kit which I'm in the process of installing so I don't want to delay unnecessarily (I'm in the UK), but nor do I want to fit a part which is going to fail.

Nice kits btw :)

tim
 
Back
Top Bottom