XXXX in 1 set up question

Snarly

New member
Joined
Aug 10, 2010
Messages
186
Reaction score
0
Location
New Jersey
Hi,
I just got my XXXX in 1 board and an atx power supply.

Can anyone please explain options for setting up with regards to:

- adding player buttons 5 and 6

- atx power supply: I get that the board needs the exra power, but what is the best way to set it up?
Should I get a multiplug surge protector and plug both the atx and the regular plug from the cabinet?
Does the multiboard need to be powered off a certain way or can I wire it to the cabinet on/off switch?

Thanks!
Chris
 
Not sure if you already know this,,,,

If you search around, you can find out how to modify the ATX PSU so you are able to eliminate one of the PSU's. This is so you don thave to use 2 PSU's
 
You can wire the other power supply through the cabinet - just get a standard plug - cut it and tie the two wires into the cabinet's AC wiring.

The 5-6 buttons are a separate harness on the top of the gameboard. I believe they usually come with this harness (at least they did years ago) in the box. If not - you will want to find a molex that will fit those pins. They have all of the player's 5-6 buttons. I belive button 4 is just on the jamma harness.

Good luck! This can be a great board when it is all set up and working properly!
 
Back
Top Bottom