Xmen Character sprite issue

PrairieDillo

Well-known member

Donor 2011, 2024
Joined
Aug 3, 2009
Messages
5,152
Reaction score
534
I guess I should start figuring out how to use my logic probe ... sadly I just ditched two bad Xmen 6P boards (sound chip) since they had sat here for so long.

This 4Player Xmen board was sound capped by me and then I noticed that all character sprites have problems. The backgrounds and tiles seem fine. Does anyone have ideas on what this could be. RAM???

IMG_20120420_173834.jpg


IMG_20120420_173855.jpg
 
Looks like an address line might not be connected. Try reseating the socketed roms. If it still persists use the probe. Also check to make sure there isn't any gouged traces.
 
I've got the same thing going on for an Aliens board I just bought and a couple folks have recommended I double check the power supply, that sometimes they need more juice.
Coincidentally I plugged my Aliens into an X-Men cab :D Had a 2 player unit/4 player board and just got a 6, so I swapped boards~
 
Back
Top Bottom