Xmen 6 player CP and CPO project set

gutz

Well-known member

Donor 2024
Joined
Feb 2, 2010
Messages
4,342
Reaction score
755
Location
Garretson, South Dakota
Rating - 99.6%
227   1   0
Here is an unusual offer. I have a CP that has damage around Dazzler and Nightcrawler (see pics). I managed to find a damaged NOS cpo. The cpo has the thin plexi layer seperating (see pics). The art underneath the plexi is in good shape.

I had planned on carefully peeling the plexi and applying the cpo to a bare cp and cutting a real piece of plexi for the top. I have made some progress on peeling the plexi, but the white colors don't like to seperate so I have cut around them. So the button arrows have the plexi over them still. See the pics.

I found another cp that was in better shape so I have scrapped the peel'n'stick'n'cover project.

If you want the old cp, the overlay, or both - pm me an offer. Not looking for much $, just hate to throw these out.
 

Attachments

  • xmenleft2.jpg
    xmenleft2.jpg
    101.5 KB · Views: 34
  • xmen right.jpg
    xmen right.jpg
    101.3 KB · Views: 33
  • xmen damage.jpg
    xmen damage.jpg
    103 KB · Views: 31
  • xmen damage 2.jpg
    xmen damage 2.jpg
    100.8 KB · Views: 24
  • xmen bottom.jpg
    xmen bottom.jpg
    98.5 KB · Views: 13
Pics of the overlay. The hazy spots are where the plexi is seperating. I started peeling on the Dazzler side. Also, 2/3 of the buttons in cp have been removed since the pictures.
 

Attachments

  • xmencpo.jpg
    xmencpo.jpg
    101.1 KB · Views: 29
  • xmencpo2.jpg
    xmencpo2.jpg
    103.5 KB · Views: 21
  • xmencpo3.jpg
    xmencpo3.jpg
    100.3 KB · Views: 18
Back
Top Bottom