XM-200IN Vertical collapse

BradFeek

New member
Joined
Feb 13, 2010
Messages
2
Reaction score
0
Location
Tumwater, Washington
I have a XM-200IN in my Vindicators machine and the vertical is too small. The image size changes with the pot, but won't get big enough. I replaced the vertical output Q502 and the related caps, but still no change. Figured maybe the flyback was bad, so I ordered one up from Chad at Arcadecup (got it in 2 days via mail!), still no change. Would C503 be causing this, or possibly the IC, HA11235? Thanks in advance for help!
 
Hey Brad, did you recap the whole chassis?

All I've ever had problem with on these are recapping and bad flybacks.
 
I did not recap the whole board. I used caps from existing kits I have around. I figured replacing the caps around the vertical circuit would fix it...
 
Back
Top Bottom