Xenon question

tester007

Well-known member
Joined
Jan 14, 2007
Messages
2,609
Reaction score
43
Location
Calgary, Alberta, Canada
I have a Xenon and a Black Knight playfield swap project going on and I think I mixed up the legs somehow between them when re-assembling. Can anyone with a Xenon measure the front and back height of the legs (minus the leveller part.. just the bracket) for me?
 
To my knowledge (and I have both of these games), both should have 28.5" legs all around, the only difference being Bally has charcoal grey painted legs, and Williams has chromed legs.

Chris
 
All sets of legs I have are chrome.. I have a set on the Xenon to install the playfield but when I played it it was just far too level and this is why I think I got something mixed up. I can measure what I have for legs I guess and post that because some are definitely longer.
 
Leg length in general should be the same, the levelers are there to adjust front/rear height. Entirely possible you have mixed ones, lots floating around out there.

Chris
 
Back
Top Bottom