WWF Wrestle-mania ROM Error

waltervan

New member
Joined
Dec 22, 2010
Messages
120
Reaction score
0
Location
Texas
I desided to get rid on my MAME and restore it to WWF Wrestle-mania to find it has a ROM Error. Now when I made it in to a MAME unit the board worked fine just the monitor was shot.
I had the PCB in storage for 2 years and it looks fine but one of the stickers on one of the roms came off exposing a little window. A buddy told me if that window is exposed to UV it will damage the ROM is this true?
If so where can I get new ROMs?
Thanks
Walter
 
Yes, you erase those roms by exposing them to UV light.

Which rom is it? The board is usually labled with a U and then a number, like U30?

Bob Roberts might carry them, or you could post on the wanted thread.
 
Yes, you erase those roms by exposing them to UV light.

Which rom is it? The board is usually labled with a U and then a number, like U30?

Bob Roberts might carry them, or you could post on the wanted thread.

Cool Ill check it out and post it later
Thanks
 
But not quite as much to just corrupt it. Did you try reseating the rom? If you can't get it going just send me the rom plus like $5 and I'll reprogram it for you. Which rom is it?
 
But not quite as much to just corrupt it. Did you try reseating the rom? If you can't get it going just send me the rom plus like $5 and I'll reprogram it for you. Which rom is it?

Ill try to reseat the roms if it still shows bad ill get your info to send it off to you.
Thanks For the Help
 
Well I reseated the roms and that fixed it.
Thanks for the help
 
considering you never know what planet this board has been to, I'd pop all the roms out one by one and check to make sure there's no corrosion on them also.

particularly the game roms, which are like U63 and U54. that'll ruin your day. :)

enjoy the game btw, makes me wanna chokeslam and tombstone people with the Undertaker. game's UBER HARD.
 
Back
Top Bottom