WTT: Working DK 4-PCB set (+more) for Omega Race repair

CoindoorDave

Well-known member
Joined
Oct 26, 2002
Messages
802
Reaction score
641
Location
Bettendorf, Iowa
Rating - 100%
9   0   0
WTT: Working DK 4-PCB set (+more) for Omega Race repair

OK, I know ORs are, more often than not, ravaged by acid damage, but this one isn't. It was even fixed by Alex Yeckley earlier this year, but alas, my power supply's blew the -12V regulator the instant I plugged it in, a cap popped and a trace burned up on the main board. I removed it and the power supply. I repaired what I could, but can't test it without a good PS.

I should have checked the obvious first, but it was too late - the previous owner had the original linear PS running for the +12, and a switcher for +5. The switcher died (was resurrected, but removed in hopes of getting the linear working 100%)

So here's what I'm looking for - someone to test/repair the PS (the +12 works, but not the +5), and repair the OR.

I've got a tested/working 4-board Donkey Kong stack, complete with mounting hardware for a cocktail cab, the working power supply, transformer assembly, and wiring harness to trade (all working - the cab was converted to a 60-in-1).

I can send photos of the OR boards & PS if anyone's feeling up to the challenge. PM me if interested. I may have some other parts to add to the deal...would really like to revive this OR...
 
Back
Top Bottom