WTT Older Neo-Geo 1-Slot PCB for Newer 1-Slot PCB

keithsarcade

Well-known member
Joined
Nov 27, 2008
Messages
8,875
Reaction score
160
Location
St Peters, Missouri
Rating - 100%
232   0   0
Its a shot in the dark, but dosent hurt to ask. I have an older (and larger) model 1-Slot with the Headphone and Memory Slot support, fully working, but apparently these older ones dont get along with multi carts too well. Would like to trade it for a newer (smaller) 1-Slot in working condition. Dont need anything fancy, just something I can put in my JAMMA cab and play.

Heres a photo of the one I have.

Any interest?
 

Attachments

  • mv1f.jpg
    mv1f.jpg
    35.6 KB · Views: 12
You might want to double check that Neo multicart in another board, the problem may be the cart and not the board. I had one that was TRIPPIN, it really liked the voltage at exactly 5v and I had to take it apart and resolder some of the wiring inside. I thought it was a compatibility problem with the pcb too but it did it on other boards that I tried as well.
 
Ive ran 2 seperate multi's in here with the same results, and the most common opinion I'm getting is that my board is just too old to properly run a multi (unless its the new 138-1 with that stupid adapter). I have tried adjusting voltage but I dont know if I tried 5v on the nose yet. I'm running 5.2v now which seems to work best. I've acually been error free for a few days now. Hope I didnt just jinx myself.
 
Back
Top Bottom