WTT: My Sega OutRun Dlx upright for your large empty MAME-able cab (Houston, TX)

Keroppi

Member
Joined
Feb 5, 2008
Messages
383
Reaction score
3
Location
Spring, Texas
Rating - 100%
2   0   0
WTT: My Sega OutRun Dlx upright for your large empty MAME-able cab (Houston, TX)

Just what the title says.
I am looking for a large (4 player capable, 27-29"+ monitor sized) cab, like a dynamo, GT stlyle, showcase, etc...
I am not super picky on the cab type, but the bigger the better, and it must be in very good condition with all EXTERIOR pieces inluded (coin door, marquee trim/plexi, etc)
...with the possible exception of the controls, and maybe the monitor itself if it is 27-29" size (meaning I am not interested in a 36" showcase cab with no monitor)...but with a monitor is definitely preferred.
I will still consider it if the control panel is set up for 1-2 players (like a Golden Tee cab) since I will have to mod it anyway, but 4P is also preferred.
I can deal with removing decals, painting, etc, but am not interested in a cab that will take half a can of bondo and 3 trips to Harbor Freight to make look nice.

The Out Run is in good condition, but is not a restored CQ piece either. It works 100% including shaker/FF, very mild burn in the monitor, side art has some marks but still very serviceable. Map on the monitor bezel is rough but intact. Cab is overall nice with one area on the side of the foot plate needing bondo/woodwork. Comes with new, not yet installed: horn emblem, grey vinyl floormat, t-molding (I have a few colors to pick from).

I am in Spring, TX and have no way to transport cabs, so coming to me is also part of the deal.

Any takers? Thanks for your time.

Justin
 
Bump for the Mother's Day crowd.
No love for Out Run? Not even enough to trade an empty generic cab? Damn...
 
I'll check the storage, I may have a cabinet to trade you.
I already have an outrun but it has some board issues, so I may just trade for yours and not have to mess with mine.
 
I have some nics large cabs, not really into Outrun though, still have the Gorgar project?
icon10.gif
 
SEGA for a SEGA

I've got a cabinet I just recently obtained, but I don't think I'll want it once it's up and running again. Still......still not a 100% sure on this yet.

It's a Virtua Fighter cabinet, normally sports a 25" Medium Resolution monitor, but that's the major part that needs work. The T molding trim is a little cracked because of the silver mirror looking coating on it. The side aren't isn't perfect but still very visibly intact for a classic. The game supposedly functions well and has all the necessary boards.

here is a few pics below

The monitor didn't work with the game because the repair job with the previous owner. The old monitor up and died and instead they seemed to have done a yoke and chassis swap because the labeling was for a K7501, but it was a K7000 standard resolution chassis and matching yoke..............so yeah, that is what needs work. Plus that tube has some slight burn in. Got a free 25" tube with no burn in though along with it so I think I may use that after I get a medium resolution chassis and yoke for it.
 

Attachments

  • VirtuaFighter.jpg
    VirtuaFighter.jpg
    96 KB · Views: 18
  • VFmodel1.jpg
    VFmodel1.jpg
    98.6 KB · Views: 5
  • VFpowerblock.jpg
    VFpowerblock.jpg
    99.8 KB · Views: 4
  • VFsoundfx.jpg
    VFsoundfx.jpg
    96.8 KB · Views: 3
Thank you very much for the offer, but I am looking for a cab that fits a 27/29" crt, since I already have a 29" crt to put in it.
 
Back
Top Bottom