WTT: My Columns PCB for your KLAX PCB

Phetishboy

Well-known member
Joined
Dec 12, 2006
Messages
47,941
Reaction score
9,402
Location
Avon, Minnesota
Rating - 100%
114   0   0
I would like to trade my working Columns PCB for your working KLAX PCB. I would also purchase your KLAX PCB if your purchase price is reasonable. Thanks.
 
Before I get too crazy, how long is a KLAX board? I'm plugging it into a two and one Jamma switcher and it needs to basically suspend straight out of an edge connector. If it's too long, I'm afraid it could damage itself under its own weight.
 
It's a longer board for sure. Tetris is much smaller. I'm nowhere near mine right now, but I can tell you that roughly that it's the same length as the width of a Williams cabaret's interior wooden coin box (that the PVC chutes enter), because I have mine installed inside a multi-cab I built from the plans on classic arcade cabinets, mounted to said coinbox.
 
Before I get too crazy, how long is a KLAX board? I'm plugging it into a two and one Jamma switcher and it needs to basically suspend straight out of an edge connector. If it's too long, I'm afraid it could damage itself under its own weight.
Definitely over a foot, about double the length of an Atari Tetris board. Could use a riddledTV two way EZ switcher, switcher goes one board and other is a connected via a ribbon cable.
 
OK, after looking over my Machine again, there's no way a KLAX board is gonna be able to stick out from the two in one switcher. I wouldn't be able to put the back door on. Uh waiter, cancel my order.

IMG_3257.jpeg
 
You could always mount the switcher to side wall of the cabinet, or get a jamma extension cable and mount the KLAX board to the sidewall of the cabinet and plug the extension into your switcher, much the same way as RiddledTV switchers are made.
 
Back
Top Bottom