WTT: My 19" K7000 chassis for your 25" K7000 chassis

smalltownguy2

Well-known member

Donor 2013
Joined
Dec 30, 2008
Messages
17,076
Reaction score
2,650
Location
Osceola, Wisconsin
Rating - 100%
154   0   0
WTT: My 19" K7000 chassis for your 25" K7000 chassis

I recently acquired a Wells Gardner 25" monitor with no chassis. I happen to have a working 19" K7000 chassis on my bench (8 pin neck) and I was hoping to trade it with someone for a 25" chassis. Anyone got one they would trade?

To sweeten the deal, I'll throw in a matching 19" chassis, with some color issues. Works though. That's 2 for the price of one.

The working chassis is from Chris25810, so you can be sure it'll hold up. :)
 
***Update***

The monitor is a Wells Gardner 25K7101.

The tube # is A63AGD01X, which indexes on the B&K setup charts as a CR-23 (10 pin), and 6.3v heater.

Just your garden variety 25" K7xxx tube. The yoke is still attached -- I presume it's a low impedance like most of WG's 25" tubes.

Hopefully this info helps prospective traders. :)
 
Back
Top Bottom