WTB: Zoo Keeper Ribbon Cables

Todd31

New member

Donor 2011
Joined
Mar 20, 2008
Messages
1,147
Reaction score
11
Location
Cape Coral, Florida
Rating - 100%
17   0   0
I would like to find a complete set of these. I was hoping someone made them so I could put something new on there. If that is not the case anything 100% working will be fine.

Thanks,
Todd
 
Cables

Your best bet is finding someone to make them for you.. As the old ones are one of the biggest fault points on this game.. I've got a box full of used ones that I use for my zk and Qix.. If you can't find anyone to make new ones I can prolly make you a set..

But, I'd hate for you to go the used route and run into issues.. As these cables don't hold up that well.. If you do find someone that makes them, please let me know!!!
 
I would like to find a complete set of these. I was hoping someone made them so I could put something new on there. If that is not the case anything 100% working will be fine.

Thanks,
Todd

Might be able to help.
Length, conductor count and plug types?

Ed
 
I have all the stuff to make them. I made a couple sets a few months ago. Used one set on my machine and sold the other set with a boardset.
Im pretty sure they are 50 pin. Two of them are pretty standard short ones like you see on alot of boards like nintendos. The other one is long and has a connector in the middle.
I can make you a set but it would be a few days. Were still recovering from the hurricane.
 
Last edited:
Well it sounds like Riptor is pretty much ready to go on this project. I am in no hurry so please recover well and let me know when you are ready. I can prepay if you would like as well.

Thanks for all the responses everyone.

Todd
 
I just got a bunch of 50 pin internal ribbon cables SCSI cables on eBay and they work great.

- Dan
 
Back
Top Bottom