WTB/WTT: Stuff, Parts, Etc.

Scott C

Well-known member

Donor 3 years: 2022-2024
Joined
Apr 15, 2009
Messages
9,716
Reaction score
1,805
Location
Missouri
Rating - 100%
68   0   0
Looking for the following:

- Mario Bros. CPO or CP w/Nice, Complete CPO (non-widebody)
- Hitachi 9550 or 9550 laserdisc player (working)
- Robotron mini bezel (super nice)
- 19" XGA arcade monitor and w/appropriate arcade frame (must do 1024x768 and I don't care about standard or medium res <CGA/EGA>)
- Taito mini/trimline (for my Taito 20-in-1, need solid cabinet & converted is fine)
- Missile Command cabaret (mini, complete)
- Bubbles mini
- Tempest poster (original, decent condition)
- Red Baron poster (original, decent condition)
-

Scott C.
 
Last edited:
I have a nonwidebody Mario CP but I would hardly call it nice.
Yeh, mine is nice except for the bend where it was cut across and painted black (actually don't look too bad, but still very annoying).

Scott C.
 
Taito mini/trimline (for my Taito 20-in-1, need solid cabinet & converted is fine)


Whats does the above look like? Is it an arcade cab or is it a monitor bezel plastic around the horizontal monitor? I may have what youre looking for after my Twin Cobra Taito cab project.
 
Taito mini/trimline (for my Taito 20-in-1, need solid cabinet & converted is fine)


Whats does the above look like? Is it an arcade cab or is it a monitor bezel plastic around the horizontal monitor? I may have what youre looking for after my Twin Cobra Taito cab project.
I'm looking for an actual Taito trimline cabinet, as shown in the following flyer. These were made for several Taito games including SI, Jungle King/Hunt, Qix, etc.

http://taitotrimlineremake.blogspot.com/

Scott C.
 
NOS Robotron mini bezels are available. I've posted the link in the past -- try a search.
I did, but don't recall running across your post. If it's still available, please provide a link. Thanks.

Scott C.
 
Back
Top Bottom