WTB working tube for a 19" K7000 monitor Norcal bay area.

PrairieDillo

Well-known member

Donor 2011, 2024
Joined
Aug 3, 2009
Messages
5,152
Reaction score
534
Rating - 100%
154   0   0
WTB working tube for a 19" K7000 monitor Norcal bay area.

I have a good chassis on a tube that has nearly lost it's red and has a heater leak in it. It did work for a while but is nearly shot after a few months. My chassis works well so I want to just swap it onto another working tube but blown chassis.

Looking for something cheap and minimal burn. I have a rejuv and it shows this tube to barely have any life left in it.
 
I have a good chassis on a tube that has nearly lost it's red and has a heater leak in it. It did work for a while but is nearly shot after a few months. My chassis works well so I want to just swap it onto another working tube but blown chassis.

Looking for something cheap and minimal burn. I have a rejuv and it shows this tube to barely have any life left in it.

Go to a thrift shop and bring a BK tube ref sheet and penlight with you. Look for a tube that uses a CR31 BK adapter and with an ID starting with "A48" and that'll work with your 7000.
 
I'm a little afraid to do a tube swap... you need to swap out the yoke right?
It's not that straight forward... or is it?
 
Back
Top Bottom