WTB: Working Tron PCB

If you've not already done it, remove and clean all of the socketed chips and replace the interconnect cables on the boards.

With that and some mixing and matching of boards between sets you might get something working without spending a lot of money.

- JM
 
I've swapped around and cleaned multiple times. The only thing I have gotten is a blue screen and when I coin-up and hit the player one button the screen goes black..I have yet to get any sound.
 
If you connect up the SCPU and VidGen board, you can bypass the SSIO to see if those two boards work. Also, verify that the interconnect cable pins are lined up properly. If you're only off by one pin, strange things can happen - nothing will show up, garbage will show up, game will fully boot but control panel won't work, etc.
 
Back
Top Bottom