WTB working Rock-Ola nibbler Pcb

Buffett

Well-known member

Donor 2012-2013
Joined
Mar 12, 2010
Messages
10,991
Reaction score
263
Location
Manassas va, Virginia
Rating - 100%
173   0   0
any body have a working Rock-Ola nibbler Pcb. mine dosent work:(

or hole cab local to me.

mine is pretty beat and i would like a better cab

thanks

Peace
Buffett
 
I'll be over friday your place and I just finished playing your Donkey Kong PCB board I repaired it for you. It had bad ram on CPU board side at locations 3A+3B and 4A+4B.I'll be bringing it with me when I come over see ya then.
 
I'll be over friday your place and I just finished playing your Donkey Kong PCB board I repaired it for you. It had bad ram on CPU board side at locations 3A+3B and 4A+4B.I'll be bringing it with me when I come over see ya then.

I thought the ram was bad but it tested good in his tester, if it is the same board. The other board had no clock signal on the video board and suspect the two transistors under the metal can lid.

Edit:

I need to start looking at the dates on some of these OLD posts......
 
Back
Top Bottom