WTB: Working G07 chassis board.

TraderSteve

Member
Joined
Apr 4, 2008
Messages
640
Reaction score
3
Location
Mountain Top, Pennsylvania
Rating - 100%
19   0   0
I have a non-working Ms Cocktail table. Even after replacing the Flyback, the hot and the fuze it still doesn't light up the monitor (though it is getting power / high voltage) the screen is completely black.

While I try and figure out what else can be wrong I'd like to get a tested working chasis I can slide in there in the mean time to get her working again.

Anyone have one or know where I can buy one? Also general price range would be helpful too.

Thanks!
---S.
 
ecwestjr or buffett may have them on hand right now.

I repair and sell them frequently, but I currently do not have any.

Price range is a tough one.

I generally sell mine for around $110-$140 shipped.

Here is how I break down parts costs:

actual chassis needing rebuild=$35-$45
flyback-$25
105* cap kit $10-$11

then a lot of times you chassis will need or you'll want to do:
width coil $11-$12
R908/Fr401/R314/315-$3-$5
replacement adjustment pots $5
105* filter cap $6
HOT -$6
VR-$6
(don't forget you have to pay to have these items shipped to you)

Anyway, rarely do all of these parts need replacment, but sometimes.

I think $120-$150 is a reasonable price for a rebuilt chassis depending on parts replaced.
 
Back
Top Bottom