WTB: Williams (Robotron) coin door parts

matman

Active member

Donor 2019, 2023
Joined
Mar 18, 2009
Messages
390
Reaction score
34
Location
Torrance, California
Rating - 100%
11   0   0
I need the two mechs and i need the part attached in the pic. Its the part that covers the coin return slot.
 

Attachments

  • photo(6).JPG
    photo(6).JPG
    90.5 KB · Views: 17
I've seen plenty of posts online (not necessarily on this site) looking for these parts, but i'm not sure if anyone has found any. I did find a pinball place that seems to sell some, but i'm not sure if they are the same size and they appear to have some $50 opening credit policy....if i read it correctly.
 
Coin door parts

People have these but do not want to take the time to pack and ship the small part. That is why they are hard to find. I have the items you seek. What is the other place charging for the mechs and the coin return piece? Do you want plastic mechs or metal ones?
 
If I have those parts off a spare door, you are welcome to them, and just cover shipping
I will check later today, does it matter if plastic or metal? and I have mechs, what sort 25c, .900 ?
 
People have these but do not want to take the time to pack and ship the small part. That is why they are hard to find. I have the items you seek. What is the other place charging for the mechs and the coin return piece? Do you want plastic mechs or metal ones?

I actually didn't look into the mechs on the other site and I'm fairly indifferent between plastic or metal mechs. I need a metal (cast) coin return bezel -the kind that screws on and i think the cost was 2-3 bux, however i'm not sure how compatible it is/was, which is why i've posted here.
 
If I have those parts off a spare door, you are welcome to them, and just cover shipping
I will check later today, does it matter if plastic or metal? and I have mechs, what sort 25c, .900 ?

I'd like 25c mechs. (plastic or metal will do)
Metal coin return bezel.

Thanks!
 
I've tried the coin return bezels from twistedquarter and they don't fit the older Coin Controls (Williams) coin doors. The old metal flaps don't fit the plastic bezel and the plastic coin door flaps are too wide for the old coin doors. I have resorted to buying POS coin doors on EBay and stripping them for parts.

ken
 
Back
Top Bottom