WTB: Wico Joystick Parts

Phetishboy

Well-known member
Joined
Dec 12, 2006
Messages
47,936
Reaction score
9,398
Location
Avon, Minnesota
Rating - 100%
114   0   0
I am looking for one tall skinny joystick, 2 or 3 of the skinny shaft black plastic dust covers for under the CP, several fat 4 and 8 way actuators and springs, and any other miscellaneous parts you might have for either the skinny or fat Wico's.
 
Have access to a 3D printer? If you can get dimensions, there are plenty of OpenSCAD files available on Thingiverse for "parametric washers." You just plug in the dimensions you want, and that generates an STL for you to print.
 
Yeah, looks like he makes the 3/8 inch washers not the 1/4 inch washers. I need the ones above and below the upper part of the base.
@braedel makes both sizes. I gave him the specs from an original 1/4" Wico dust washer a few months back and he made a stack of repros for my inventory. They turned out great, just like anything else he reproduces.
 
@braedel makes both sizes. I gave him the specs from an original 1/4" Wico dust washer a few months back and he made a stack of repros for my inventory. They turned out great, just like anything else he reproduces.
Oh shit, he does say he makes the 1/4 inch ones. Sorry for whatever reason I was not thinking straight. Those looked like the bigger ones and I didn't even look at what he posted, I was just looking at the picture. Sorry, Brad.
 
Last edited:
Back
Top Bottom