WTB: Wg6100 hv pcb working or non

runner

Member
Joined
Apr 30, 2009
Messages
99
Reaction score
4
Location
Gainesvillle, Georgia
Rating - 100%
3   0   0
I have a new flyback but I still need the small hv transformer.

Hoping someone has some non-working stuff laying around and would rather have some $

let me know thanks!
 
ok it is specifically this -------Horizontal Driver Transformer (T901).
Atari Part Number: 99-130049
Wells Gardner K6100 Part Number: 52X0126-001B.
 
Wow..Do you have several of these Mylstar? Ive seen a couple of these go bad.. There is a mod somewhere on the internet that you basically add a fuse in line with the primary side. Ive done it on a couple. If your 555 fails with the output high, you get a melted transformer. The fuse is like 3/8A or something that would save the trans. If anyone ever updates the 6100 Faq, they should add it.

Andrew
 
I laid out the PCB for the P329 version of the HV unit:

http://www.gauck.com/arcade/6100HV/board layout.png

but then stopped as the transformer was the unavailable. Wondering if they are the same as what's on the Amplifone board. Dez, do you know the specs to be able to wind some for the 6100? If they are also used in the B&W monitors (which?) they could be worth making.
 
I laid out the PCB for the P329 version of the HV unit:

http://www.gauck.com/arcade/6100HV/board layout.png

but then stopped as the transformer was the unavailable. Wondering if they are the same as what's on the Amplifone board. Dez, do you know the specs to be able to wind some for the 6100? If they are also used in the B&W monitors (which?) they could be worth making.

Different specs, and winding numbers

Same bobbin though as the Amplifones, except there is no metal piece (Cover) on the amps, I have 25 empty bobbins left from the Amp project.
 
Back
Top Bottom