WTB: WG4700 Chassis or Parts. CR 25 neck socket needed!

sk8ersublime

Well-known member
Joined
Mar 7, 2010
Messages
2,067
Reaction score
62
Location
Frederick, Maryland
Rating - 100%
24   0   0
WTB: WG4700 Chassis or Parts. CR 25 neck socket needed!

Good morning all!

I have a K4700 I am having some focus issues with. I have recapped the monitor, swapped a flyback from a K4600 (which ohm ratings matched on all pairs to the one from the K4700), and I replaced the 100pf 12KV cap at the focus pin on the neck board. I am unable to get a fully focused picture. It looks like it is about to clear up, then I get to the end of the pot and its just slightly out of focus, however it gets better if I turn the brightness down, but again its not perfect. It is possible its the tube as when testing with patterns, the colors had to be all the way up for the colors to show up correctly. I am getting arcing on the focus pin inside of the neck socket.

Anyone have a chassis and flyback or a neck board or a CR25 neck socket? A CR 25 neck socket would be ideal, because if that doesnt fix it I am guessing the tube is the problem as I feel ive tried everything else.

Let me know whats out there!

Thanks!
Chad
 
Back
Top Bottom