Wtb: Wg19k6400

jetusenet

Well-known member

Donor 4 years: 2011, 2013-2014, 2024
Joined
Feb 26, 2006
Messages
7,234
Reaction score
743
Location
Staten Island, New York
Rating - 100%
111   0   1
Hi;
I understand the chances are slim but I am hoping to one day complete my Aztarac project.
I am interested in parts as well.
Thanks
Jeff
 
A hopeful -bump-
I assume you know this, but a WG K6102 can easily be converted into a WG K6400. There are literally only a couple of very small differences between a 6102 and a 6400, which is much harder to find. The 6100 FAQ outlines these differences on page 8.

Hopefully, this helps you complete your project.

Scott C.
 
Scot;
With all due respect, I beg to differ.
I have tried a 6100 already, with mods and there is no way it can handle the output of the Aztarac PCB......
The 6400 has a different deflection circuit and CRT.
6100:19VLUP22 (std) // 6400:19VNJP22((med)-(low IMP yoke))
6100:25-0-25v // 6400:40-0-40v
6100:X16vP/P - Y12vP/P // 6400:X8vP/P - Y6vP/P
The 6100 just cannot keep up and collapses. I have been told that I might have a better chance finding a G08-105 and that might work but would have to be modified as well.
I spent A LOT of time in my attempt to get a 6100 to work and it just ain't gonna happen.........

If I am off-base with my line of thinking, please let me know. I would love to hear that I am missing something and I could actually use the 6100 in my cab.

Thanks for the try...

Jeff
 
Scot;
With all due respect, I beg to differ.
I have tried a 6100 already, with mods and there is no way it can handle the output of the Aztarac PCB......
The 6400 has a different deflection circuit and CRT.
6100:19VLUP22 (std) // 6400:19VNJP22((med)-(low IMP yoke))
6100:25-0-25v // 6400:40-0-40v
6100:X16vP/P - Y12vP/P // 6400:X8vP/P - Y6vP/P
The 6100 just cannot keep up and collapses. I have been told that I might have a better chance finding a G08-105 and that might work but would have to be modified as well.
I spent A LOT of time in my attempt to get a 6100 to work and it just ain't gonna happen.........

If I am off-base with my line of thinking, please let me know. I would love to hear that I am missing something and I could actually use the 6100 in my cab.

Thanks for the try...

Jeff
The info I was provided must be inaccurate since I was not aware there was a resolution difference (etc.) between the monitors. Thanks for the detailed info.

Scott C.
 
Back
Top Bottom