WTB: WG 19 K7203 Chassis

john2654

Well-known member

Donor 3 years: 2011, 2020, 2024
Joined
Mar 30, 2010
Messages
6,426
Reaction score
1,272
Location
Rhinelander, Wisconsin
Rating - 100%
77   0   0
I have a WG 19K7203 monitor. It does a fast constant clicking noise. No neck glow, from what I can see. Should I try to replace 2SC5297 ? Or if some just has a cheap one for sale, let me know.

EDIT: FIXED BOTH, THANKS!
 
Last edited:
7203

If the one that does not sync correctly,check and see if the switch is on the 17khz and move it to 15khz.
If your sync wire is at the end only, jumper another wire from that to the sync 2nd to the end and see if changes. now if your sync is by your video wires and ground move it to the end position.
Also there should be a little jumper plug connecting two of the three pins next to the video plug. so make sure their is a plug at the test/monitor connector.
I have a few 7203's on the "when i get to" shelf.
If you cannot find one soon i will get a few done.
 
Back
Top Bottom