WTB: wacko trackball pcb

The one I have a bunch of is the bally sente trackball interface. I don't think that will work for wacko. I guess is someone needs some for hat trick or gimme a break, I have them..

But I do have 1 interface that is probably what you need. Its on an NOS shoot the bull control panel. If thats what you need, let me know.

pcb2-11.jpg


pcb-1.jpg


http://i215.photobucket.com/albums/cc188/mrbill2084/pcb1-15.jpg
 
the bottom pic has the connector that looks similar, I will get home in a bit and find out.
thanks bud
 
doesn't look like any of those match unfortunately.

here are a few pics.
 

Attachments

  • trackballpcbwacko 004.jpg
    trackballpcbwacko 004.jpg
    87.9 KB · Views: 29
  • trackballpcbwacko 002.jpg
    trackballpcbwacko 002.jpg
    84.1 KB · Views: 28
  • trackballpcbwacko 001.jpg
    trackballpcbwacko 001.jpg
    82.4 KB · Views: 23
  • trackballpcbwacko 003.jpg
    trackballpcbwacko 003.jpg
    87.4 KB · Views: 22
Oh, you need the optical board, not the interface board. I can look for one of those. Its probably the same board for tron spinner.

I also have a kickman controller. I can dig it out and it possibly could have the same one.
 
Oh, you need the optical board, not the interface board. I can look for one of those. Its probably the same board for tron spinner.

I also have a kickman controller. I can dig it out and it possibly could have the same one.


now we are talking. thanks again buddy
 
Back
Top Bottom