wtb victory road parts

Heres some stuff I have.

The marquee is cut but depending on your cab it might work. Looking at it again its not that nice. The face could be cleaned up and polished and the black parts on the back could be touched up I guess. 23 11/16 wide by 6 3/8 tall.

Have two bezels. One folded horizontal ( 23 3/4 wide by 21 11/16 tall) and one vertical ( 23 3/4 wide by 23 3/4 tall). They have the usual paint chipping at the folds. The horizontal one is full sized and the vertical one is cut down a bit. Both are a bit wavy but should flatten out once installed.

Let me know and heres some pictures.
 

Attachments

  • IMG_0509.JPG
    IMG_0509.JPG
    1.2 MB · Views: 7
  • IMG_0511.JPG
    IMG_0511.JPG
    1.3 MB · Views: 5
  • IMG_0513.JPG
    IMG_0513.JPG
    1.2 MB · Views: 4
  • IMG_0515.JPG
    IMG_0515.JPG
    1 MB · Views: 1
More pictures. 23 3/4 by 7 9/16
 

Attachments

  • IMG_0516.JPG
    IMG_0516.JPG
    1.2 MB · Views: 4
  • IMG_0517.JPG
    IMG_0517.JPG
    1.1 MB · Views: 2
Last edited:
Back
Top Bottom