WTB - various parts....please LOOK

Darth Vader

Active member

Donor 2012
Joined
Jun 21, 2006
Messages
1,548
Reaction score
8
Location
Kewaunee, Wisconsin
Rating - 100%
15   0   0
Hello everyone

I'm in the middle of a few projects and am looking for some parts. Send me a message if you can help me out.

Thanks

Parts wanted:

Galaga (cabaret/MINI) bezel
Galaga (full size) back door (or a comparable midway door I can paint is fine too)
Asteroids PCB (pending deal)
Asteroids monitor


Any help would be appreciated.

Thank you!
 
Last edited:
might be parting out my water damages AD cab. Monitor was working then died, I did no work to it not even a cap kit. Brad might want the AD boardset so I will have a monitor to sell.

-Jake

Oh and if you need any directv work done let me know as I am quitting in the next month.
 
do you have a bad rolling thunder pcb?.
I have seen a shorted diode on those before that drags down the 5v line..
wonder if thats the case with yours also..


Hello everyone

I'm in the middle of a few projects and am looking for some parts. Send me a message if you can help me out.

Thanks

Parts wanted:

Rolling Thunder PCB
Galaga (cabaret/MINI) bezel
Galaga (full size) back door (or a comparable midway door I can paint is fine too)
Asteroids PCB
Asteroids monitor


Any help would be appreciated.

Thank you!
 
rolling thunder PCB

What's happening is it plays the whole game just fine, but when you die, it doesn't reset to the start of the level. You just come back to life in the exact same spot where you died and continue on your way. Could be as simple as a bad eprom. I'll have you take a look at it when I pick up my monitor, Chad.

Thanks
 
Not cool, sounds like a possible game mod / cheat.. maybe a new eprom set would take care it.. excellent game though.. ill be keeping mine for the long haul.


What's happening is it plays the whole game just fine, but when you die, it doesn't reset to the start of the level. You just come back to life in the exact same spot where you died and continue on your way. Could be as simple as a bad eprom. I'll have you take a look at it when I pick up my monitor, Chad.

Thanks
 
do you have a bad rolling thunder pcb?.
I have seen a shorted diode on those before that drags down the 5v line..
wonder if thats the case with yours also..

As they say the simplest solution is usually the right one....took a good look at the PCB today and little did I know that Rolling Thunder has an invincibility mode built into the PCB! I just changed the dip switch settings and it is working perfectly now.

I do have some items that I will have for sale/trade that I will post later on tonight, FYI.
 
Back
Top Bottom