wtb tron interconnect cables

cadillacman

Well-known member
Joined
Nov 25, 2007
Messages
15,504
Reaction score
542
Location
Roscoe, Illinois
Rating - 100%
12   0   0
looking to buy some new cables. those "mcr" scsi cables or whatever theyre called.

Tried bobs and had nothing but issues.(nothing against bob-this just aint working out)

Looking for some other alternative, single row double, whatever. got paypal $ ready to go.

im about ready to solder wires between pins and call it a day at this point.
 
Last edited:
looking to buy some new cables. those mrc scsi cables or whatever theyre called.

Tried bobs and had nothing but issues.

Looking for some other alternative, single row double, whatever. got paypal $ ready to go.

im about ready to solder wires between pins and call it a day at this point.

What kind of issues did you have?
 
locks falling apart, intermittent connection, poor fit, etc. had to grind a couple to make em fit.

Have reflowed the headerpins twice, cleaned the header pins with scotchbrite pad to remove oxidation then cleaned with alchol.

when it messes up ive got corrupted or missing caracters and missing or static sounds
at one point it was just sound issues and i replaced the wiring between the pcb and the audio amp and it made no change.

thought it was dirty chips cleaned and reseated but just barely touching the cables causes issues (and in selftest while testing sound channels it comes and goes if the cables are bately touched)so im damn sure ive still got cable issues.
 
Back
Top Bottom