WTB: Top bezel bracket for Phoenix

mattosborn

Well-known member
Joined
Aug 19, 2008
Messages
6,688
Reaction score
2,756
Location
Derry, New Hampshire
Rating - 100%
87   0   0
I'm looking for a top bezel bracket for a Phoenix. Not a marquee bracket, but the retainer that holds the monitor bezel at the top, outlined in red here:

phx_topbez.jpg


There are some other games that were in the same or similar Centuri cab that probably use the same bracket, like Pleiades, Eagle, D-Day, etc.
I found the four carriage bolts that secure it lying in the bottom of the cab, but the bracket itself was MIA.
Please let me know if you have one. Or if you could take a good picture and a couple measurements so I could maybe make my own, that would be much appreciated.

Thanks,

Matt
 
I should have this but may need more info or a better pic to identify it, maybe a measurement on the distance between screw holes and # of screws? I'm pretty sure I have just about every metal whatever from that cab.
 
I should have this but may need more info or a better pic to identify it, maybe a measurement on the distance between screw holes and # of screws? I'm pretty sure I have just about every metal whatever from that cab.

That's the only pic I could find online that showed it.... I have no idea what it looks like, or whether it is metal or plastic. The bolt pattern appears to be identical to the lower marquee bracket, so that doesn't help much.
I'm hoping someone can take a nice picture of their Phoenix for me.
 
Is there any screw holes where it should be? If so can you give me an idea of how many? I looked where I thought it would be but its at my garage, which I can hit up on my way home.
 
Just pulled out what I have...looks like the marquee bracket and top bezel bracket may be one in the same. I think it measures 23 5/8 long, and has 4 screw holes, the end ones being 1 7/8 from the edge. I have 3-4 identical pieces like this, and I think they do the marquee and the bezel because one has screw marks on the outside like a typical marquee bracket, another has screw marks on the inside, as if it was flipped upside down and mounted to the top of the cab to hold the bezel in.

$12 shipped if your interested, and I'll put a pair (or possibly 3) in the tube.
 
The holes should be square, as the bracket is attached with carriage bolts. If it is the same piece as the marquee bottom bracket then I may have one.... I'm hoping someone with a Phoenix can confirm that. Anybody?
 
Did you get your bracket situation taken care of? If not, I just tore down a scrap Phoenix cab and I have the exact piece you're looking for. I'd be willing send you whatever measurements you wanted.
 
Did you get your bracket situation taken care of? If not, I just tore down a scrap Phoenix cab and I have the exact piece you're looking for. I'd be willing send you whatever measurements you wanted.

I went digging through a pile of brackets this weekend, and I couldn't find that one. I'll send you a PM. Thanks.
 
Back
Top Bottom