WTB Taito wiring connectors.

caddysrule

New member
Joined
Dec 7, 2007
Messages
1,083
Reaction score
8
Location
Tracy, California
Rating - 100%
24   0   0
I need the wiring from the filter board connections on J2, V2, and R15.

J2 goes from filter board to speakers
V2 goes from filter board to monitor
R15 goes from filter board to coin door

If you got any of these laying around let me know....
Thanks
 
Taito connectors

Hey, what taito game are the connectors for? I've just finished making a harness for my Zookeeper and Qix, so I have plenty of molex connectors.. Do you need them wired up?

Pete
 
Hey, what taito game are the connectors for? I've just finished making a harness for my Zookeeper and Qix, so I have plenty of molex connectors.. Do you need them wired up?

Pete

Im building a Wild Western I want original connectors but If I get no bites I will just make them myself.
 
Original?

Really man, you want original connectors? I've owned and own a lot of taitos and original connectors are a pain in the ass.. As the pins inside wear out and really loosen up.. Not to mention the plastic doesn't hold up great..

Hey, if thats your thing then more power to you.. I'd rather swap them out with new molex connectors so you'll NEVER have to deal with failures.. Biggest problem connector is the one that connects to the pcb.. I replace it on every taito I get..

Gonna keep and rebuild the awful power supply too? Yuck :(

Just one tip, if you don't know.. On the interconnect pcb, make sure to reflow every header pin.. As 75% of mine have needed it.. Really makes a difference..

Good luck sir.
 
Really man, you want original connectors? I've owned and own a lot of taitos and original connectors are a pain in the ass.. As the pins inside wear out and really loosen up.. Not to mention the plastic doesn't hold up great..

Hey, if thats your thing then more power to you.. I'd rather swap them out with new molex connectors so you'll NEVER have to deal with failures.. Biggest problem connector is the one that connects to the pcb.. I replace it on every taito I get..

Gonna keep and rebuild the awful power supply too? Yuck :(

Just one tip, if you don't know.. On the interconnect pcb, make sure to reflow every header pin.. As 75% of mine have needed it.. Really makes a difference..

Good luck sir.

I got 10 Taito games and I havent had any problems with any connectors yet. Im sure my luck will run out :) As far as power supplys go once my PS dies I go to the arcade shop switcher. Three of my Taitos are still working on the original power supplys.
 
Back
Top Bottom