WTB: Taito arcade cabinet

Radford119

Well-known member

Donor 2011, 2023
Joined
Aug 15, 2010
Messages
1,868
Reaction score
876
Location
Indiana
Rating - 100%
113   0   0
WTB a nice structurally sound Taito cab similar to the one in the picture below. Doesn't matter which game or even if it has a monitor. I would just like it to be in decent shape and have the main pieces such as coin door, bezel, marquee brackets, control panel, etc.

Thanks

gamespys-top-50-arcade-games-of-all-time-20110224024219353.jpg
 
Good luck! I am searching for the same thing currently, only on the west coast.

May I ask what you are plans are for the cab? I am planning on putting Bubble Bobble in mine.
 
Multi Taito



What is a Multi Taito? Sounds intersting.

I have what you are looking for exactly like that, but painted over black. Currently its a Twin Cobra, but Im keeping the Twin Cobra stuff. Same color scheme, and green. Restored.
 
Free

I've got a nice clean green taito cab with no water damage in Massachusetts..
Free for the taking :)

Plus I've got a ton of parts for it.. Mostly jungle king..
 
Thanks for the offers guys, I appreciate it. But I can't drive that far for one. I would be down for driving about 200 miles or pay someone to bring it to me if they are passing through.
 
I am planning a multi taito myself... what ideas do you have for the control panel? I am converting my birdie king which has a great cab... not sure if I should mod the CP or buy one from a different game. Any thoughts?
 
I'm doing a Multi-Taito project myself. I have a Taito project cab I got from another klover, but it needs a lot of work. I will either repair (it is MDF, so that will be a treat) or I'll use it as a pattern to make a new cab out of birch plywood. I picked up an Elevator Action kit (Marquee, complete CP, bezel, etc) from dj_dns and will use that. EA has 2 buttons, so it will work for all the Multi-Taito games.
 
Is Greenville, SC too far for you? I have one I partially restored w/ a Bubble Bobble in it that needs a cap kit installed on the monitor, a CPO, and T-Molding to complete it. I think there is one or two more (working) Taito cabs on the floor with misc boards in them. I cant see your pic in the original post (blocked at work, go figure...) but these are all Taito cabs for sure.
 
Back
Top Bottom