wtb system 3 williams mpu/power supply for flash pinball

pinkpot

New member
Joined
Nov 2, 2010
Messages
1,771
Reaction score
13
Location
WEST, Michigan
Rating - 100%
29   0   0
wtb system 3 williams mpu/power supply for flash pinball

mine...bought it a while ago..just ran it cos it ran. (still quite the newb on some stuff)
didnt have the manual...
on the "not used" part on th ps they ran a 20 amp fuse. 1/4 was a 4 amp
10 was a 20...long story short after looking up a manual and doing some stuff on it.
relized that this was being overjumped badly. when it was 2 late!!!
need and mpu and a power supply...anyone have an original working for a good price?
just checking before i went the rottendog replacement direction

edit, to tired and posting to early...
its the driver board i need.
not the board with the roms but the board beneath it..someone help me with my lingo...lol
 

Attachments

  • 034 (Copy).jpg
    034 (Copy).jpg
    100.9 KB · Views: 16
Last edited:
What's wrong with them? May be much cheaper to get the existing ones repaired.

Typically a driver board runs around $100-150 in good working condition, power supplies anywhere from $50 to $75.

Lots of new manufacture boards out there as well, depending on the route you want to take. Rottendog and Pinscore both have highly improved power supplies brand new for $75 or so.

-Hans
 
not sure what is the problem with them, i see a huge black spot on the driver was burnt badly.
do u fix boards?

What's wrong with them? May be much cheaper to get the existing ones repaired.

Typically a driver board runs around $100-150 in good working condition, power supplies anywhere from $50 to $75.

Lots of new manufacture boards out there as well, depending on the route you want to take. Rottendog and Pinscore both have highly improved power supplies brand new for $75 or so.

-Hans
 
parts

PP

Check Mr Pinball on the Web. There is tons of Flash stuff there.

I had a Flash I bought a long time ago. I won a new Flash on ebay and transferred my good parts to it.

I had to buy a new MPU and Controller to make mine work. Thats not counting the coils that were fried as well.

I have two Flash's now and will have to buy more parts to get the second one going. I would hit Mr. Pinball up first.

Good luck
 
Back
Top Bottom