WTB: Stunt Cycle Board - Working

elektronforge fixes them if you have a non-working one...also, if you have one that isn't working, you can take the "connector board" off of it and connect the wiring harness directly to the board...the "connector boards" often go bad and can be bypassed...
 
I have a semi working one...I tested it a while back and it would not sync....but another board did work so I know the monitor was good. If you get to the point where you want to fixing one, let me know.
 
Thanks for the replies. I already have a board that works but is lacking any sound. Thought I would see if there are any fully working boards out there before sending it to Alex @ elektronforge. Used him in the past with good results.

Tom
 
Back
Top Bottom