WTB: Street Fighter III 3rd Strike PCB

timahtimah

New member
Joined
Aug 24, 2010
Messages
65
Reaction score
0
Location
Seattle, Washington
Rating - 100%
2   0   0
I am looking for a street fighter III 3rd strike pcb along with the works:

CPS3 system
IDE drive
Working cartridge
Working cd

if you would like to part with it, please let me know and we can arrange payment.
 
Couple points to think about.
1. SF3 (CPS3) does not have an IDE Drive
2. CPS3 does have a SCSI CDROM drive
3. You can burn discs if you don't have one...
4. US is the most valued to americans (typically)
5. US can only be resurrected as Asia if it dies.
6. JP can be resurrected, for a pretty penny to JP.
7. American 3s full setups go for anywhere from 350-500.
8. 3s requires more memory simms than the other sf3 games... so upgrading is not that simple
 
I have a entire box of picked up cps3 hardware with should be dead carts.. ill go dig them up and post some pics in a bit.. make a good offer if your are interested.
 
EDIT THIS HARDWARE HAS ALLL BEEN !$SOLD$!

ok here it is!..
I had this stuff mothballed since late 2005..
all 3 carts are sf3 third strike..
2 original cds in perfect scratch free mint condition.
3 motherboards.
5 cd rom drives.. I know 2 are factory originals not sure on the rest.
one motherboard marked bad
another marked bad, eats carts?
and the other motherboard marked known good.
this was all from 2005 when I was fresh just getting into the hobby!.
ahh the memories. the ram is all marked good.. 16 sticks.
I had third strike up once and not sure what really happened between all the hardware.. maybe just the carts went bad and all 3 motherboards are good. I was new at the arcade scene in 2005 so I probably didn't know what I was doing considering where I am at now..

sf3hw.jpg


First $85.00 shipped gets everythign pictured!!

paypal [email protected] or call for credit card order over the phone.
 
Last edited by a moderator:
Back
Top Bottom