WTB: Some Neo Geo MVS buttons/switches

lilmul123

Member
Joined
Sep 15, 2009
Messages
55
Reaction score
0
Location
Michigan
Rating - 100%
1   0   0
My cabinet has two buttons and switches that are sticking and need replacement. Does anyone know a good source for these?
 
My cabinet has two buttons and switches that are sticking and need replacement. Does anyone know a good source for these?

You can probably just take the buttons apart, clean them, and put them back together and they won't stick anymore.

If it's the switch itself, some rubbing alcohol on a Q-tip will help clean the actuator...
 
as long as the microswitch works, just strip down the buttons and wash the button center and housing in warm soapy water. They get gummed up with soda, sweat, dust and skin often.

I have a neo geo that came with really dirty buttons so I saved the buttons and changed all of the switches but made sure to clean them all. They all work perfectly fine now without the extra buck for swapping a full button.
 
Back
Top Bottom