Wtb: Screws for tron pieces

MrSinister

Well-known member

Donor 9 years: 2015-2022, 2024
Joined
Dec 30, 2008
Messages
1,785
Reaction score
114
Location
Pittsburgh, Pennsylvania
Rating - 100%
109   0   0
I need the screws for ;
monitor shroud.
upper plastic light cover
metal trim piece that goes between shroud and upper light cover.

Let me know how many and which ones you have. I need them all.
Thanks
 
I got all the bolts needed from Amazon. Just ref the Tron manual for the bolt size. There is a seller there that has the exact zinc black oxide torx security bolts. I may have extras from the lot I got. Definitely have extras for the control stick and the blacklight glass over the CP.
 
Still looking for these. Home depot and Lowes don't have them. Can find them on amazon but only at 1000 piece pack. Does anyone have original screws they'd sell?
 
I'll need to check my email for the receipt, but there's at least 1 seller on Amazon that sells them in 25 & 50 packs (depending on the fastener) as I bought all new screws. The only difference between these and the original is that the original are supposed to be T20 security (pin in center) torx heads (neither of my TRONs have these!), and the ones I purchased were 5/32 hex security heads. You have to look closely to tell the difference.
 
Seller was actually Amazon itself, go figure:
#10-32 x 3/8" (joystick) http://www.amazon.com/dp/B0068TR3WA/
#10-32 x 3/4" (bezel) http://www.amazon.com/dp/B0068TR69K/
#8 x 5/8" (marquee hardware) http://www.amazon.com/dp/B006FB83GQ/

I should have extras of all these (I need 2 sets, plus maybe 1 spare). If you don't mind waiting until I get it squared away, I can send you a set (5x joystick, 8x bezel, 6x marquee) for shipping costs.

I didn't buy the nickel screws for the CP light cover (the ones underneath the bottom bezel flap/metal strip) so I don't have any extras of those.
 
Back
Top Bottom