WTB Rygar Pcb and Harness

Parpunk

Member
Joined
Mar 6, 2010
Messages
603
Reaction score
3
Location
West Virginia
Rating - 100%
17   0   0
Anyone? I Have paypal ready to burn on these items. Also wouldn't mind some side art and anything else you may have. Looking to finish up a nice rygar. PCB must be 100 percent working. Harness can be original or with jamma connector. Thanks!
 
If you are any good with making wiring adapters, this one is pretty straight forward. I have a JAMMA to Rygar adapter myself.

Scott C.
 
If you are any good with making wiring adapters, this one is pretty straight forward. I have a JAMMA to Rygar adapter myself.

Scott C.

ive never made one before. You have any interest in making one for some cash? Im talking to bob roberts on making me one right now.
 
ive never made one before. You have any interest in making one for some cash? Im talking to bob roberts on making me one right now.
If my time weren't so limited right now I would do it. Unfortunately, as it is I am farming out some work too...

Scott C.
 
I've only run across a few Rygar conversions and it seems like all of them were hacked-in using the original harness rather than with the wiring harness included in the Rygar kit. Weird.

Scott C.
 
I bought mine with a harness and it was unhacked, I think I may have a harness that might work for it, although you would have to connect each wire manually as its from a different game, I will look for you. If I do, you have have it, just pay shipping, but I will check the parts room (as it now has become..)
 
I think I still have a Rygar board... possibly the wire harness, I can check. Definitely a control panel, mine was in a Joust cab that I converted to Multiwilliams.
 
Back
Top Bottom