WTB: robotron mini/cabaret bezel, marquee, harness.

Slo

Member

Donor 2011
Joined
Jul 19, 2011
Messages
495
Reaction score
5
Location
Ohio
Rating - 100%
23   0   0
WTB: robotron mini/cabaret bezel, marquee, harness.

Title says it all. I just picked up a robotron cabaret that was converted to a Bottom of the Ninth. Ugh. It needs a bezel and a marquee. Right now it is wired up jamma so my jrok multi board is handling CPU duties. I would assume the harness is the same as the full size, just shorter??? Any help would be greatly appreciated.
Thanks for looking,
Mike
 
They are translite. super thin prints that go behing a chunk of clear plexi. Not very nice, but it'll do if you can't find anything else.

I kinda figured. I'm definitely looking for NOS but I don't think I can live with this bottom of the ninth marquee much longer.
A pretty crappy conversion.
Mike
 
I scanned the art a few years ago. You can get repro CPO's if lucky from Darrin. I had a full set of what you needed I traded away the other year. I can see if I still have the Marquee and bezel scans. I would have Rich do a custom glass or plexi marquee and bezel reverse printed and adhered to the back of the glass. I think the same could be done for a CPO if needed. Also there is a strip of lights on the back door to light up the bezel. I did buy a NIB Mini Robo as many others here when they were available.

Michael
 
I scanned the art a few years ago. You can get repro CPO's if lucky from Darrin. I had a full set of what you needed I traded away the other year. I can see if I still have the Marquee and bezel scans. I would have Rich do a custom glass or plexi marquee and bezel reverse printed and adhered to the back of the glass. I think the same could be done for a CPO if needed. Also there is a strip of lights on the back door to light up the bezel. I did buy a NIB Mini Robo as many others here when they were available.

Michael

I have gawked at the NIB mini robo websites. All I have to say is WOW!!!! Just to clarify, that's darrin from Phoenix arcade and rich from TOG? Mine is missing the lights on the back door for the bezel. The op also clipped the marquee wires so that isn't lighting up either. Needless to say I've got a lot left to restore. I guess I'm gonna open a thread in the restoration section to show my progress. My cpo is looking great now that I pulled/rubbed the old overlay off. The only problem is the four extra buttons that have been drilled. *sigh*

Thanks,
Mike
 
Back
Top Bottom