WTB: Qbert bootleg PCB

Bootleg Qbert

I have a bootleg Q-bert. Sold as working had some graphic glitches that cleared up after reseating the chips. I cannot make the sound work however for the jamma conversion still not sure how the audio is supposed to be wired. It is the bootleg version 3 I found reference too. So if you can help me out with testing the sound may have a board I can supply.
 
Why not mod the cab for a real Qbert PCB and sound card?

Bill
 
Why not mod the cab for a real Qbert PCB and sound card?

I did give that some thought, but...

1) It was already wired for JAMMA as it had been converted to Top Gunner
2) This is just a temporary thing until JROK releases his Multi-Mylstar pcb

.
 
I have a bootleg Q-bert. Sold as working had some graphic glitches that cleared up after reseating the chips. I cannot make the sound work however for the jamma conversion still not sure how the audio is supposed to be wired. It is the bootleg version 3 I found reference too. So if you can help me out with testing the sound may have a board I can supply.

I made this site a few years ago when my sound did not work.

I now have a jammatized qBert, and had to do the Andy's arcade sync mod also
http://www.dsbelec.iinet.net.au/Qbert-Bootleg-1.htm

I have a few bootlegs, but the freight may be a bit high from AU
 
Anyone? Guess I'm stuck hoping JROK makes this a very Qbert Christmas with his multi-Mylstar.
 
Back
Top Bottom