WTB: Pole psition EMI board and EMI connector PCB

Paul Olson

Well-known member

Donor 2011
Joined
Apr 14, 2008
Messages
3,864
Reaction score
90
Location
Reno, Nevada
Rating - 100%
19   0   0
I am missing both of the end boards for Pole Position. I really need the small connecting one, but I guess the shield PCB might also be good to have.

Thanks,
Paul
 
I am missing both of the end boards for Pole Position. I really need the small connecting one, but I guess the shield PCB might also be good to have.

Thanks,
Paul

i have a pole position cab that has the monitor/pcbs removed. is the emi board part of that or something different? ill dig in it and see if i have
 
They plug into the ends of the board. The one in the back is probably about 2" x 4", connecting the two edge connectors. The front one is probably 5" x 12" or so. This one plugs in to the edge connectors at the front of the board. The wiring harness is then plugged into this board.
 
the wiring harness will also plug into the boards, where the EMI filter connects.
You can run it without that one.
the little black ones are harder to find. There were several people looking and posting here about 12-18 months ago. Some got a couple of e-bay
 
I think your talking about the filter card. You really don't need that to
run the game. Mine don't have it, and the game runs fine.

Check Quarterarcade.com for the interconnect board. I saw one for sale lastnight
when I was on the site lastnight.

Update here is the part, I think you need:
http://www.quarterarcade.com/Game.aspx/7339
 
Last edited:
if you really want one i have one i can send to you free for the price of shipping, its a pole position filter card, i get them free all the time off games, i personally use them for jumper boards in rigs, uum it does have one burnt pin on the 20 pin connector but otherwise working.
 
if you really want one i have one i can send to you free for the price of shipping, its a pole position filter card, i get them free all the time off games, i personally use them for jumper boards in rigs, uum it does have one burnt pin on the 20 pin connector but otherwise working.

pm sent

I found the little board at Quarter Arcade.
 
Back
Top Bottom