WTB: Pole Position I or II PCB End Board

DanoND

Active member
Joined
Jan 6, 2008
Messages
1,207
Reaction score
5
Location
Bismarck, North Dakota
Rating - 100%
17   0   0
I need the board that connects to the wiring harness, not the interconnect board between the two PCBs. I think I'm explaining that right.

...it has the white plastic plugs that push into the edge of the PCB cage to hold the PCBs inside.

I'm also looking for a cooling fan for the same game - I think it came with one that used a shroud over the top of the cage to direct airflow....? I've seen pictures of people who've made shrouds. I'd like to do the same. So, to recap...

- end board
- fan
- shroud
- my sanity back

Thanks.
 
I need the board that connects to the wiring harness, not the interconnect board between the two PCBs. I think I'm explaining that right.

...it has the white plastic plugs that push into the edge of the PCB cage to hold the PCBs inside.


Thanks.

that is a emi filter board, you don't need it to run the game but check this thread
http://forums.arcade-museum.com/showthread.php?t=128565
arcadejunke9 looks to have some
 
Back
Top Bottom