WTB Playchoice Single Monitor CP Harness

wmacmonagle

Active member

Donor 2012
Joined
Jul 6, 2010
Messages
2,059
Reaction score
10
Location
Rosamond, California
Rating - 100%
103   0   0
I do not need the one connects to the board. I need the harness (controller wires) that connects to the Main CP harness from the buttons (leaf plugs) etc

the short one that comes wtih player 1, 2, 4 buttons start up etc..

PM pleas thanks
 
Reason I asked is...

I have Main CP harness that comes with wiring to guns (PC10) I m hooking up the PC10 into the DK cab.

I tried to use VS CP and I was able to use everything but couldnt start the pc10 games.

I could hit player 1 (select) and Player 2 (choose game)

Then I cant hit (start) any of button to start game.

i looked at the wiring and looks like this Harness has four players buttons.. so I was thinking If it s much easier if I just add two more wires to the Connector and drill and makes two more tiny holes to install mini button and ti would work that way instead of getting complete kit?

Advise please

Thanks in advance
 
Just look at the connection on the PC10 molex connector and see which wires are missing from the vs. harness connector and add them to the vs. molex connector. Then add the extra buttons as you said. I would think that should work.
 
Back
Top Bottom