WTB: Pacific Novelty Thief - everything!

Griffin

Well-known member
Joined
Oct 26, 2012
Messages
5,541
Reaction score
1,347
Location
EL CAJON, California
Rating - 100%
27   0   0
Stumbled across this Thief cab today, not in the best shape, but for something so uncommon I'm thinking maybe I should be trying to restore it.

15027978_1181266538633870_2182939917262280716_n.jpg


As you can see it's been converted, the only thing left inside seems to be the power supply/iso.

I need the following...

FOUND - Working Board Set
FOUND - Tape & Tape Deck
- Tape Deck harness
- Wiring Harness
FOUND - Marquee
FOUND - Bezel
FOUND - CPO
FOUND - - Side Art
 
Last edited:
I've got a spare fully working board set including the ribbon cable, and i can throw in a copy of the cassette tape. i have another working cassette deck as well, but i haven't tested it in my thief because i don't have a spare molex connector to wire it up with.

i also have a spare marquee that is in very nice shape (only a couple of small scratches)

all you'd need is a bezel (quarterarcade.com has two right now), a control panel (you could just modify the one you have and get a cpo from thisoldgame), and a harness, which is easy to build for this game as all voltages can be supplied from a standard switching supply, and you're good to go!

make me an offer if you'd like!
 

Attachments

  • IMG_1658[1].jpg
    IMG_1658[1].jpg
    196.1 KB · Views: 17
  • IMG_1656[1].jpg
    IMG_1656[1].jpg
    195.8 KB · Views: 16
  • IMG_1657[1].jpg
    IMG_1657[1].jpg
    187.8 KB · Views: 15
  • IMG_1663[1].jpg
    IMG_1663[1].jpg
    192.9 KB · Views: 17
I've got a spare fully working board set including the ribbon cable, and i can throw in a copy of the cassette tape. i have another working cassette deck as well, but i haven't tested it in my thief because i don't have a spare molex connector to wire it up with.

i also have a spare marquee that is in very nice shape (only a couple of small scratches)

all you'd need is a bezel (quarterarcade.com has two right now), a control panel (you could just modify the one you have and get a cpo from thisoldgame), and a harness, which is easy to build for this game as all voltages can be supplied from a standard switching supply, and you're good to go!

make me an offer if you'd like!

Thanks Mike I'll PM you
 
oh yeah...side art can now be found at escapepodonline.com

mine was a karate champ when i found it and not nearly in as nice of shape as your cab is!!!
 

Attachments

  • IMG_1664.jpg
    IMG_1664.jpg
    191 KB · Views: 20
Back
Top Bottom