WTB: Out Run pcb, Plastics, etc...

Grbgemen

Active member
Joined
Mar 12, 2008
Messages
1,167
Reaction score
8
Location
Lincoln, Nebraska
Rating - 100%
33   0   0
Looking for an nice clean Out Run pcb. Prefer working but will consider others. Even just the CPU board if that is all you have. Turbo Out Run also wanted in same condition.

Also need a nice clean plastic bezel with no cig burns. Dash would also be useful but these might be reproduced.

Gears, gears, gears. Pretty sure all the steering gears on this machine are cracked. Let me know what you got.

Thanks.
 
Back
Top Bottom