WTB or trade: MCR/III Spy Hunter PCB support plates

matthew180

Member
Joined
Apr 6, 2011
Messages
84
Reaction score
2
Location
Winter Springs, Florida
Rating - 100%
2   0   0
WTB or trade: MCR/III Spy Hunter PCB support plates

I have a Spy Hunter and the PCB stack always seemed to be wrong. It did not fit in the cabinet right and the mounting support did not hold things correctly. After some looking around, I found that 2 of the 3 plates I have are not for the Spy Hunter boards / cabinet.

It seems I have 2 plates for maybe Tapper? At any rate, I don't want to modify them because I just can't bring myself to do it. However, I would like to get the proper plates for the Spy Hunter board set. I have the front plate, but I need the middle and back.

Thanks,
Matthew
 

Attachments

  • mcr3_pcb_plates1.jpg
    mcr3_pcb_plates1.jpg
    92.6 KB · Views: 6
  • mcr3_pcb_plates2.jpg
    mcr3_pcb_plates2.jpg
    93 KB · Views: 3
Back
Top Bottom